ICOM IC-2300H 65Watts Mobile 2 Way Radio


The IC-2300H, 144MHz mobile, retains the same basic features from the popular IC-2200H; powerful 65W output power, simple-to-use user interface, built-in CTCSS and DTCS encoder/decoder, etc. While keeping those basic features, the IC-2300H is packed in to a smaller body (in depth) than the IC-2200H.

Output power

 65W, 25W, 10W, 5W

RX frequencies:

 144-148MHz

Memory channels:

 207 (includes 6 scan edges & 1 call)

Simple operation

ICOM IC-2300H 65Watts Mobile 2 Way RadioThe IC-2300H’s basic panel layout includes a simple user interface. A large LCD with 6 alphanumeric characters offers a good viewing angle for mobile operation. Select either the amber, yellow or green backlight color. The bottom of the display indicates the available front panel functions.

Built tough

Rough roads won’t stop the IC-2300H from working. This mobile has been tested to and has passed the latest MIL-STD 810 G specifications including shock, vibration and temperature tests. The rugged aluminum diecast chassis provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission.

Multiple scan functions

The IC-2300H supports various scan types for maximum reception to suit your needs. The DMS (Dynamic Memory Scan) system allows you to scan selected banks from 10 memory banks by simply adding and deleting bank links.

  • Full scan
  • Programmed scan
  • Memory scan
  • Bank scan
  • Bank link scan (DMS)
  • Skip scan
  • Priority scan
  • Tone scan

 

 


General
Frequency coverage
TX
RX
144–148MHz
136–174MHz
Mode

F2D, F3E

No. of memory channels207 (including 6 scan edges and 1 call)
Frequency resolution5, 6.25, 10, 12.5, 15, 20, 25, 30, 50kHz
Operating temp. range

–20°C to +60°C;

14°F to +140°F;

Frequency stability

±3ppm (–10°C to +60°)

Power supply requirement:

13.8V DC ±15%
Current drain (at 7.4V DC):

Transmit at 65W

Receive Stand-by

Receive Max. audio


11A

0.4A

1.5A

Antenna impedance50Ω (SO-239)
Dimensions (W×H×D)
(projections not included)
140x1.57x162 mm; 5.51x1.57x6.38 in
Weight (approx.)1Kg; 2.43lb
Transmitter
Modulation systemVariable Reactance
Output power65/25/10/5W
Spurious emissionsLess than –60dBc (High, Mid)
Max. deviation±5.0/2.5 kHz wine/narrow)
Microphone impedance60Ω (8-pin modular)
Receiver
Receiver systemDouble superheterodyne
Intermediate frequency 46.35MHz/450kHz (1st/2nd)
SensitivityLess than 0.18μV at 12dB SINAD
Squelch SensitivityLess than 0.13μV at threshold
Selectivity

Wide

 

Narrow


More than ±6kHz/6dB

More than ±14kHz/60dB

More than ±3kHz/6dB

More than ±9kHz/55dB

Spurious rejection

 More than 60dB

Audio Output Power4.5W (typ.)
External speaker connector2-conductor 3.5(d) mm 1/8"/4Ω

Applicable U.S. Military Specifications

StandardMIL 810 G
MethodProcedure
Low Pressure500.5I, II
High Tempurature501.5I, II
Low Tempurature502.5I, II
Tempurature Shock503.5I-B
Solar Radiation505.5I
Vibration514.6I
Shock516.6I, IV

All stated specifications are subject to change without notice or obligation.

Supplied accessories

  • Hand microphone, HM-133V
  • DC power cable, OPC-1132
  • Mounting bracket kit
  • Microphone hanger and spare fuses

  • Built-in CTCSS and DTCS encoder/decoder for quiet standby and repeater access
  • Power supply voltage display
  • 4.5W (typical) loud audio
  • Reduced depth dimensions
  • DTMF autodial
  • Time-out timer
  • Repeater lockout
  • Automatic power off
  • S-meter squelch
  • Wide/narrow channel setting
  • Weather channel receive and weather alert function
  • Automatic repeater function
  • Selectable squelch delay from short and long
  • Squelch attenuator reduces suppression from string signals