ICOM IC-F2000 IP67 Waterproof Ham Radio Walkie Talkie


ICOM IC-F2000 IP67 Waterproof Ham Radio Walkie Talkie

Compact, Slim Dimensions IP67Waterproofing and Full of Useful Features

IP67 Waterproof and Dust-tight Protection

The IC-F1000 series has a 24.5mm slim depth with IP67 waterproof casing. 

The transceiver can withstand 1m depth of water for 30 minutes. Its dust-tight construction prevents the ingress of powder dust, sand, mud and other objects.

 

Enhanced Emergency with Built-in Motion Sensor

With a built-in motion sensor, the IC-F1000 series can detect its position, state of motion and non-motion and can send an emergency signal. The motion function detects if the transceiver is moving or shaking, for example, during a chase. The lone worker and man down functions are programmable.

Easy to Hear in a Noisy Environment

The large 36mm speaker of the transceiver provides clear companded 800 mW* audio. The built-in BTL amplifier doubles the audio output power and delivers loud and intelligible voice to a radio operator working in noisy environments.
* Typical with internal speaker

Inversion Voice Scrambler

The built-in inversion voice scrambler provides secure conversation. Up to 16 codes are selectable.

14 Hours of Operating Time with Supplied Waterproof Battery

The supplied waterproof Li-Ion battery pack, BP-279 (1570mAh typ.), provides 14 hours* of operating time.
* Tx:Rx:Standby=5:5:90. Power save function ON.

Quiet Stand-by and More

The IC-F1000 series has built-in 2-Tone, 5-Tone, CTCSS and DTCS signaling capabilities for group communication and selective calling..

MDC 1200 Compatible

The following MDC features are programmable.

  • PTT ID
  • Emergency (No ACK transmission)
  • Radio check (RX only)
  • Stun/Revive (RX only)
  • Transmit status messages (LCD types only)
  • 100 alias table (LCD types only)

Channel Announcement

When you rotate the channel knob, the radio announces the channel number.
Convenient for making radio adjustments without having to look at the radio.

Other Features

  • 8 DTMF autodial memories
  • BIIS PTT ID and emergency call
  • “Shift key” function increases number of programmable key assignments
  • Surveillance function

Supplied accessories

    • Battery pack, BP-279
    • Desktop charger, BC-213
    • AC adapter, BC-123S
    • Belt clip, MB-133
    • Antenna


*May differ depending on version


General

 

IC-F1000/S/T

IC-F2000/S/T

Frequency coverage
(Varies according to version)
USA
136–174MHz
400–470MHz
450–512MHz
EXP
335–380MHz*1
400–470MHz
450–520MHz
Number of channelsIC-F1000
IC-F2000
16 channels
IC-F1000T/S
IC-F2000T/S
128 channels
Type of emission
16K0F3E*2/11K0F3E
Channel spacing
12.5/25kHz
Power supply requirement
7.5V DC nominal
Current drainTx High
1.3A
RxStand-by
77mA
80mA
Max. audio
(Internal SP)
330mA
300mA
Antenna impedance
50Ω
Operating temperature range
(Radio specification)
–30°C to +60°C; –22°F to +140°F
Dimensions
(projections not included; W×H×D)
52.2×111.8×24.5mm
2.06×4.4×0.96 in
(With BP-279)
Weight (approx.)
240g
8.47oz
(With BP-279)
*1IC-F2000 Non-LCD version only.
*225kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.

Transmitter

 

IC-F1000/S/T

IC-F2000/S/T

RF output power
5W, 2W, 1W
(Hi, L2, L1)
4W, 2W, 1W
(Hi, L2, L1)
Max. frequency deviation (W/N)
± 5.0kHz/±2.5kHz
Spurious emissions
70dB min.
Frequency stability
±2.5ppm
Audio harmonic distortion (W/N)
.0%/1.5% typ. 
(AF 1kHz 40% deviation)
FM Hum and Noise (W/N)
46/40dB typ.
Ext. microphone connector
3-conductor 2.5 (d) mm (1/10ʺ)/2.2kΩ

Receiver

 

IC-F1000/S/T

IC-F2000/S/T

Sensitivity (at 12dB SINAD)
0.25μV typ.
Adjacent channel selectivity (W/N)
76/53dB typ. (TIA-603D)
78/71dB typ. (TIA-603A)
73/56dB typ. (TIA-603D)
74/64dB typ. (TIA-603A)
Spurious response rejection
70dB min.
Intermodulation rejection
74dB typ.
73dB typ.
Hum and noise (W/N)
51/45dB typ.
49/43dB typ.
AF output power
(at 5% distortion)
Internal SP
800mW typ.(With 12Ω load)
External SP
400mW typ.(With 8Ω load)
Ext. speaker connector
2-conductor 3.5 (d) mm (1⁄8ʺ)/8Ω

Measurements made in accordance with TIA-603 (USA/EXP). 
All stated specifications are subject to change without notice or obligation.

FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS

 

IC-F1000/S/T IC-F2000/S/T

Number of option slots
-
CTCSS/ DTCSencoder
Available
decoder
Available
2-Toneencoder
Available
decoder
Available
5-Toneencoder
Available
decoder
Available
DTMF autodial
Available
DTMF decoder
-
Voice ScramblerInversion
Available
Non-rolling
-
Rolling
-
APCO P25 digital
-
6.25kHz digital
-
MDC 1200
Available (Limited functions)
Motion function
Available
Lone worker function
Available
Man down function
Available
Intrinsically safe
-
Voice announcement
Available
Audio compander
Available
GPS receiver
-

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

StandardMIL-810 G
Method, Proc.
Low Pressure Storage
500.5 I
Low Pressure Operation
500.5 II
High Temperature Storage
501.5 I
High Temperature Operation
501.5 II
Low Temperature Storage
502.5 I
Low Temperature Operation
502.5 II
Temperature Shock
503.5 I-C
Solar Radiation
505.5 I
Rain Blowing
506.5 I
Rain Drip
506.5 III
Humidity Induced
507.5 II
Salt Fog
509.5
Dust Blowing
510.5 I
Immersion
512.5 I
Vibration
514.6 I
Shock Functional
516.6 I
Shock Transit Drop
516.6 IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

Ingress Protection Standard (IC-F1000/T/S, IC-F2000/T/S & HM-168LWP)
Dust & Water
IP67 (Dust-tight and waterproof protection)



All stated specifications are subject to change without notice or obligation.