Specifications
General:
- Frequency Range:118.0 - 136.975MHz
- Channel Spacing:*8.33kHz / 25kHz
- Mode:AM (6K00A3E)
- Number of Memory Channels:99
- Power Supply Requirement:13.8V or 26.4VDC(Negative ground only)
- Usable temp. range:-30℃ to +60℃
- Frequency Stability:+/-5ppm
- Current Drain:TX:6A(MAX),RX:6A(MAX), Standby:260mA
- Dimensions:(W)150mm × (D)190mm × (H)50mm
- Weight:1700g
Transmitter:
- Output power:9W (carrier) typical,36W (P-P)
- Modulation:Last stage modulation
- Modulation limiting:70 to 100%
- Audio harmonics distortion:Less than 15% (at 85% modulation)
- Hum and noise ratio:More than 40dB
- Spurious emissions:-16dBm or less
- Antenna impedance:50Ω
Receiver:
- Receive system:Double conversion superheterodyne
- Intermediate frequency:1st:38.85MHz (Upper) 2nd:450kHz (Lower)
- Sensitivity (at 6dB S/N):Less than 1uV
- Squelch sensitivity:0.5uV (Threshold)
- Selectivity:
25kHz channel spacing:More than ±8kHz (at 6dB) / Less than ±25kHz (at 60dB)
*8.33kHz channel spacing:More than ±2.778kHz (at 6dB) / Less than ±7.37kHz (at 60dB) - Spurious response rejection:More than 60dB
- Audio output power:More than 15W (at 4Ω)
- Side tone:More than 100mW (at 600Ω)
- Hum and noise:More than 25dB
- Audio output impedance:Ext. Speaker 4 ohms(4 to 8Ω) / Side tone 600Ω
*Except USA version
Features:
- Easy to install in any vehicle
- Highly visible alpha numeric display
- Provides multiple scanning functions
- Operates in the 760 Channel VFO mode
- Simple to program
- Compatible with a standard push-to-talk switch and air band headset
- Priority scanning
- Multiple speakers, antennas, cables and programming options
- Front panel control of external speaker
- Includes MP-100 hand microphone, 1 mic hanger and screws, 1 ten-foot DC power cable with 10 amp fuse, and 1 mounting bracket kit