Monitor multiple frequency ranges from one base location
The GRA-D3000 is designed for listeners who switch between VHF airband voice, UHF channels and other signals that their receiver can tune and decode. The omnidirectional design receives signals from around the antenna. Actual reception varies with frequency, antenna placement, obstructions, feed-line loss and receiver settings.
Check the elements and connectors before mounting
Use the assembly diagram to identify the upper disc elements and downward-sloping cone radials before mounting the antenna vertically on a suitable mast. The SO-239 antenna jack mates with a PL-259 plug. Check the input on your scanner or SDR before connecting the cable. For a long run or weak signals at higher frequencies, compare the published loss of cable options at your target frequency.
| Specification | Details |
|---|
| Receive coverage | 75–3000 MHz |
| Specified transmit bands | 144, 430, 900 and 1200 MHz bands |
| Impedance | 50 ohms |
| Antenna connector | SO-239 female |
| Elements | Stainless steel |
| Included feed line | 10 m (32.8 ft) RG-58 coax |
Before transmitting, check the band allocations and licensing requirements in your area and measure SWR at the operating frequency. If you mainly listen on one band, compare a band-specific antenna in the same location.